Melt flow index tester in Hyderabad, Telangana

Product Description

MFI is a measure of the ease with which a thermoplastic polymer melts and flows. The Melt Flow Index value is derived from the rate of extrusion of the molten polymer through a die under prescribed conditions of temperature, load, and orifice diameter. Melt Flow Index is expressed in terms of the weight of the polymer in grams flowing out through the die in ten minutes. Melt Flow Index is expressed in terms of the weight of the polymer in grams flowing out through the die in ten minutes. To conduct melt flow tests on the materials, we at Testronix have designed a high-quality melt flow index tester in Hyderabad, Telangana. This is one of the high-quality lab testing equipment that is used to test the melt flow index of the material and test its viscosity.

In addition, Melt Flow Index can be used to classify polymers and to select suitable polymers for specific applications. The Testronix melt flow index tester helps to compare the molecular weight distribution of the content when used for specific applications. The higher the melt flow index of the polymer, the lower will be its molecular weight. Testronix offers high-quality melt flow index tester motorized sample cutting, melt flow index tester Panorama and melt flow index tester manual.

Quickly assess the molten properties of materials with Testronix MFI tester

Plastic has become a go-to material in circumstances where innovation has increased the use of polymer raw materials, resins, and composites. Because plastics are so common, it's more necessary than ever for manufacturers to maintain strict quality control. Testing the flow properties of polymers & thermoplastics is one of the essential quality control tests that needed to be conducted in order to assess the molten properties of these materials. Testronix has come up with one of the highest quality MFR testers that give you accurate testing results of the physical properties of the materials.

With the use of an MFI Tester, you can simply assess the product's quality. A microprocessor-based PID temperature controller ranging from 0 to 400 degrees Celsius has been embedded in the Testronix melt flow index tester. With a resolution of 0.1 degrees Celsius, it gives you an extremely precise measurement of test results. The equipment adheres to all industry standards (ASTM D 1238, IS 2267, IS-2530, IS 10810). You can simply get more information about the use of this quality lab testing equipment by giving us a call at +91 9313140140 or emailing us at info@testronixinstruments.com. Our team of technical experts will consult you regarding your needs and queries.